Flashing the Bridge =================== This page flashes a release of the Wi-Fi bridge firmware from the browser. It needs Web Serial, which Chrome, Edge and Opera have on desktop. The list shows every `lwIP-CE-WiFi-bridge release `_, newest version first, and selects the newest stable one. Plug the bridge board into this computer through its USB-C port. Choose a release and the board, then press **Flash** and pick the board's serial port. Flashing replaces everything on the board, saved networks included. .. raw:: html

Log

     
If flashing fails at 921600 baud, try a lower rate. To flash from the command line instead, see :doc:`using-wifi`. Setting Up Wi-Fi ---------------- The bridge can also be given its networks from here, so they do not have to be typed on the calculator. This needs bridge firmware 1.0.0 or newer. Plug the bridge in and press **Connect**; right after flashing, the page connects on its own. A network saved here is joined right away, and the page reports whether the bridge got on. .. raw:: html

Not connected to the bridge.

Saved networks

Add a network